HR
foam
(High Resilient)
Applications:
Comfort
Healthcare |
The SUPRA and MagicPore lines consist
of types of foam with high elasticity and minimum continuous compression
fatigue. |
  CLD
at 40%: from 0.22 to 0.80 psi
Density
from 1.56 to 3.74 lb./ft.³ |
CMHR
foam
(Combustion Modified High Resilient)
Applications:
Comfort
Healthcare
Industry |
CMHR foam is hardly flammable,
it fulfils stringent national and international fire protection standards.
We will be pleased to provide details. |
CLD
at 40%: from 0.51 to 0.75 psi
Density
from 2.50 to 3.12 lb./ft.³
|
Capillary
foam
Application:
Industry |
The capillary types of foam from
FoamPartner consist of an extremely fine cell structure. These cells provide
a large overall surface allowing an extremely large storage volume. The
cells are optimally adapted to moistening by liquids. This ensures good
retention capacity allowing uniform discharge of the fluid. |
Pores
per inch: 50 to 110 ppi |
High-comfort
foam
Application:
Comfort |
The EvoPore line is distinguished by
its intentionally irregular pore pattern. This provides particular comfort
features. |
CLD
at 40%: from 0.36 to0.51 psi
Density
from 2.50 to 2.81 lb./ft.³ |
| Visco-elastic foam
Applications:
Comfort
Healthcare
Industry
Automotive |
The SAF* line from FoamPartner
includes types of foam which absorb concussion type loads and react
visco-elastically when the force is exerted slowly.
*Shock absorbing foam
|
Density
from 2.68 to 9.36 lb./ft.³ |
Sealing
foam
Applications:
Industry
Automotive |
REGISEAL foam is virtually impermeable
to air and water. Its air permeability is <20 liters/m² per second,
which is significantly lower than standard types of foam . REGISEAL
foam guarantees impermeability to water even at a compression of 50 %.
|
Density
from 1.87 to 3.37 lb./ft.³ |
Filter
foam
Applications:
Industry
Automotive |
The PUR filter foam from FoamPartner
is available with polyester or polyether basis. It has a distinguished homogeneity.
The large bandwidth of pore densities available optimally covers a wide
variety of requirements for filtration and saturation products. |
Polyester:
8 to 100 ppi
Polyether:
10 to 110 ppi
Airflow:
305 to 2,438 L/ft³s
Density
from: 1.31 to 4.37 lb./ft.³ |
Hydrophilic
foam
Application:
Industry |
Our hydrophilic types of polyether and
polyester foam have a good absorption and retention capacity for
aqueous mediums. |
Absorption:
medium
good
very
good |
Shock-absorbing
types of foam
Applications:
Comfort
Industry
Automotive |
The shock absorbing types in the
HDH line (high density hard) offer maximum shock absorption and damping
at minimum weight.
|
CLD
at 40% from 1.45 to 2.75 psi
Density
from 2.18 to 3.74 lb./ft.³ |
Polyester
foam
Applications:
Industry
Automotive |
This line of ester base foam from
FoamPartner consists of numerous types of special foam with excellent specific
properties. The line includes special types of foam with a high compressive
hardness in addition to types resistant to light and ageing. |
CLD
at 40% from 0.43 to 5.80 psi
Density
from 1.25 to 6.24 lb./ft.³
Cells
per inch: 30 to 76 |
Polyether
foam
Applications:
Comfort
Healthcare
Industry
Automotive |
FoamPartner has a large assortment of
high quality ether base special types of foam . Foam with exceptionally
good return properties, which also show good values for continuous compression
fatigue in tests. The FoamPartner production line also includes ether foam
with excellent hydrophilic properties. |
CLD
at 40% from 0.17 to 2.75 psi
Density
from 1.25 to 6.86 lb./ft.³ |
Prepolymer foam
Applications:
Industry
Automotive
|
Pre-polymer foam products withstand
even high mechanical loads. Such criteria are resistance to abrasion and
tearing. |
Cells
per inch: 10 to 56 |
Semi-hard,
thermally deformable foam for automobile headliners
Application:
Automotive |
The semi-hard types of foam for
automobile headliners have low weight, can be shaped thermally, are temperature-resistant
and have good acoustic absorption properties. |
Density
from 1.37 to 2.31 lb./ft.³ |
Sound-absorbing
light-weight foam
Applications:
Industry
Automotive |
Particularly light-weight and thermally
shapeable, semi-hard types of foam with exceptionally good acoustic
absorbing properties.
|
Density
from 0.62 to 1.25 lb./ft.³ |
Colored
foam
Applications:
Packaging
Industry |
When great value is placed on the coloring
of the foam , the line of light-resistant colored foam from
FoamPartner can be used. |
Colors:
black, red, yellow,
blue,
green
CLD
at 40%: 0.56 psi
Density:
1.87 lb./ft.³ |
Polyethylene
foam
Applications:
Packaging
Industry |
This line also includes a wide selection
of PE types of foam , processed by the FoamPartner group. |
ETHAFOAM, QUASH, FLEXATHEN,
PLASTAZOTE, SPX – SVA, EVAZOTE, ALVEOLIT |
Melamine
foam
Application:
Industry |
We also supply products using the acoustically
effective melamine foam material BASOTEC. |
Density:
0.62 lb./ft.³ |